МК-574-008 А

The analog output module МК-574-008 A is used to reproduce an analog signal in a range of 4 to 20 mA (0 to 20 mA), as well as to carry out exchange via the HART protocol.

TECHNICAL CHARACTERISTICS:

Dimensions HxWxD: 180x40x145,2 mm;
Weight: not more than 370 g;
Structural design: for installation on a standard 105 mm DIN bar;
Connection: 40 contacts, 1.5 mm², PUSH-IN;
IP protection: Ip20;
Power supply voltage: 5 V;
Power consumption: 1 W;
Number of outputs: 8;
Accuracy grade: 16 bits;
Reproduction range: 4...20 (0...20) mА;
Indication of outputs status: yes;
Possibility to maintain a control action: yes.

METROLOGICAL CHARACTERISTICS:

Current 4...20 (0...20) mА:

• Basic reduced error of measurement: ± 0,05%;
• Additional reduced error caused by a change of ambient air temperature from (25±2) °C to any temperature in a range from minus 20 °C to plus 70 °C: ± 0,1%.

Calibration interval: 5 years.